ULTRON RACE
ULTRON RACE is the ultimate performance, synthetic engine oil design to provide maximum engine protection for all passenger cars and light-duty trucks and vans powered by gasoline engines. ULTRON Race is suitable for high-performance engines especially those fitted with turbochargers, or operated under the most sever conditions.
ULTRON Race is formulated using synthesized hydrocarbons and an advanced functional additive to provide outstanding thermal stability and oxidation resistance to prevent build-up of carbon and lacquer deposits on vital moving parts. 5W-40 viscosity grade allows ULTRON Race to flow faster through the engine providing supreme protection during cold-engine start-up when most engine wear occurs.
GRADE: SAE 5W-40
PROPERTIES
• Longer engine life
• Lower tailpipe emissions and increased catalyst efficiency
• Exceptional thermal stability and oxidation resistance
• Better volatility and viscosity properties
• Outstanding wear protection and exceptional engine cleanliness
• Reduced vehicle maintenance cost
APPLICATION: Gasoline-powered cars/trucks, high speed automotive engines
AVAILABLE PACKAGES
• 200-liter drum
• 18-liter pail
• 6 x 1 liter in carton
TYPICAL CHARACTERISTICS
| Specific Gravity at 15.6 ºC | 0.8530 | |
| Flash Point, COC, ºC | 216 | |
| Color, ASTM | 2.5 | |
| Viscosity at 40 ºC, cSt | 86.0 | |
| Viscosity at 100 ºC, cSt | 14.0 | |
| Viscosity Index | 167 | |
| TBN, mg KOH/g | 10.3 | |
back to top
ULTRON RALLYE
ULTRON Rallye is a multi-grade semi0synthetic engine oil designed to provide maximum engine protection for all passenger cars and light-duty trucks and vans powered by gasoline engines. ULTRON Rallye is suitable for high-performance engines, especially those fitted with turbochargers, or operated under the most severe conditions.
ULTRON Rallye is formulated using an advanced functional additive to provide outstanding thermal stability and oxidation resistance to prevent build0up of carbon and lacquer deposits in vital moving parts.
ULTRON Rallye contains a highly shear-stable polymer to provide control of viscosity throughout the life of the oil. It minimizes initial viscous drags providing fast start-up and rapid oil circulation from cold condition while maintaining adequate viscosity to protect against wear under fully warmed-up or high speed driving conditions.
The use of ULTRON Rallye results in reduced fuel consumption and extended oil drain intervals.
GRADE: SAE 10W-40
PROPERTIES
• Longer oil drain interval
• Lower tailpipe emissions
• Better thermal stability and oxidation resistance
• Better volatility and viscosity properties
• Better wear protection
• Better engine sludge and soot control
• Reduced vehicle maintenance cost
APPLICATION: Gasoline-powered cars/trucks, high speed automotive engines
AVAILABLE PACKAGES
• 200-liter drum
• 18-liter pail
• 6 x 4 liter in carton
• 24 x 1 liter in carton
TYPICAL CHARACTERISTICS:
| Specific Gravity at 15.6 ºC | 0.8746 | |
| Flash Point, COC, ºC | 230 | |
| Color, ASTM | 2.5 | |
| Viscosity at 40 ºC, cSt | 98.22 | |
| Viscosity at 100 ºC, cSt | 14.35 | |
| Viscosity Index | 151 | |
| TBN, mg KOH/g | 9.8 | |
back to top
ULTRON TOURING
ULTRON Touring is Petron’s universal multi grade gasoline engine oil designed to meet the high performance requirements of the most modern American, European and Japanese Vehicles.
PROPERTIES
• Gives superior anti-wear protection to cylinder rings, liners and valve trains
• Keeps engine clean through superior control of sludge, rust, deposits, gums and resins
• Cost effective due to fuel economy and extended oil drain characteristics
APPLICATION: Gasoline-powered cars/trucks, high-speed automotive engines
AVAILABLIE PACKAGES
• 200-liter drum
• 18-liter pail
• 6 x 4 liter in carton
• 24 x 1 liter in carton
TYPICAL CHARACTERISTICS
| Specific Gravity at 15.6 ºC | 0.8905 | |
| Flash Point, COC, ºC | 238 | |
| Color, ASTM | 5.0 | |
| Viscosity at 40 ºC, cSt | 157.5 | |
| Viscosity at 100 ºC, cSt | 17.98 | |
| Viscosity Index | 127 | |
| TBN, mg KOH/g | 6.7 | |
back to top
ULTRON XTRA
ULTRON XTRA is a multi-grade engine oil designed for gasoline engines used in moderate operating conditions such as passenger cars.
PROPERTIES
• Provides anti-wear protection for cylinder rings, liners and valve trains
• Contains additives for better protection against sludge, varnish, rust, wear and high temperature thickening
APPLICATION: For gasoline and diesel engine
AVAILABLIE PACKAGES
• 200-liter drum
• 18-liter pail
• 6 x 4 liter in carton
• 24 x 1 liter in carton
TYPICAL CHARACTERISTICS
| Specific Gravity at 15.6 ºC | 0.8911 | |
| Flash Point, COC, ºC | 248 | |
| Color, ASTM | 3.5 | |
| Viscosity at 40 ºC, cSt | 129.2 | |
| Viscosity at 100 ºC, cSt | 14.70 | |
| Viscosity Index | 116 | |
| TBN, mg KOH/g | 6.4 | |
back to top
REV-X HD
REV-X HD is a single-grade, heavy-duty motor oil recommended for diesel and gasoline engines of passenger vehicles that require short drain intervals.
GRADE: SAE 10, 30, 40 and 50
PROPERTIES
• Provides satisfactory performance in engines used under mild operating conditions
APPLICATION: Automotive diesel and gasoline engines under mild operating conditions requiting short drain intervals
AVAILABLIE PACKAGES
• 200-liter drum
• 18-liter pail
• 6 x 4 liter in carton (SAE 30 & 40)
• 24 x 1 liter in carton (SAE 30 & 40)
TYPICAL CHARACTERISTICS
10 |
30 |
40 |
50 |
||
| Specific Gravity at 15.6 ºC | 0.8709 |
0.8833 |
0.8979 |
0.8907 |
|
| Flash Point, COC, ºC | 218 |
232 |
262
|
264 |
|
| Color, ASTM | 1.0 |
3.5 |
4.0 |
4.0 |
|
| Viscosity at 40 ºC, cSt | 29.62 |
90.81 |
137.9 |
218.3 |
|
| Viscosity at 100 ºC, cSt | 5.24 |
10.93 |
14.50 |
18.77 |
|
| Viscosity Index | 108 |
105 |
104 |
56 |
|
| TBN, mg KOH/g | 4.7 |
4.7 |
4.7 |
4.7 |
|
back to top
REV-X ALL-TERRAIN
REV-X ALL-TERRAIN is a synthetic, ultra-high, multi-grade, heavy-duty engine oil meeting the highest level of American and European heavy-duty diesel specification.
PROPERTIES
• Meets demanding needs of modern day low emission engines • Has superior soot control that reduces ring and liner wear and provides veering corrosion protection • Has high resistance to oil thickening and gum formation • Has exceptional anti-oxidant performance that reduces oil degradation • Has outstanding piston cleanliness • Allows for extended oil drain interval due to enhanced dispersancy • Reduces oil consumption that leads to less top-ups • Improves engine startability and idling characteristics
APPLICATION: Turbocharged or supercharged high performance diesel engines operating under both low speed-high load and high speed-high loads condition
AVAILABLIE PACKAGES
• 200-liter drum
• 18-liter pail
• 6 x 1 liter in carton
TYPICAL CHARACTERISTICS
| Specific Gravity at 15.6 ºC | 0.8609 | |
| Flash Point, COC, ºC | 206 | |
| Color, ASTM | <3.5 | |
| Viscosity at 40 ºC, cSt | 74.30 | |
| Viscosity at 100 ºC, cSt | 12.06 | |
| Viscosity Index | 159 | |
| TBN, mg KOH/g | 16 | |
back to top
REV-X HAULER
REV-X Hauler is a high-performance single-grade engine oil designed to meet the requirements of turbocharged and supercharged automotive diesel engines, especially those used in passenger cars and buses.
GRADE: SAE 10, 30, 40 and 50
PROPERTIES
• Provides better protection against acids and bearing weight loss
• Provides low level of camshaft and valve train wear
• Possesses outstanding sludge, deposit and gum control capabilities
APPLICATION: Designed for a wide range of automotive diesel and gasoline-powered engines, such as heavy-duty highway vehicles not requiring a multi-grade oil
AVAILABLIE PACKAGES
• 200-liter drum
• 18-liter pail
• 6 x 4 liter in carton (SAE 30 & 40)
• 24 x 1 liter in carton (SAE 30 & 40)
TYPICAL CHARACTERISTICS
10 |
30 |
40 |
50 |
||
| Specific Gravity at 15.6 ºC | 0.8697 |
0.8910 |
0.8955 |
0.8985 |
|
| Flash Point, COC, ºC | 218 |
236 |
248
|
256 |
|
| Viscosity at 40 ºC, cSt | 30.40
|
95.30 |
137.9 |
205.1 |
|
| Viscosity at 100 ºC, cSt | 5.30 |
11.20 |
14.50 |
19.00 |
|
| Viscosity Index | 104 |
104 |
104 |
104 |
|
| TBN, mg KOH/g | 10.1 |
10.1 |
10.1 |
10.1 |
|
back to top
REV-X TREKKER
REV-X Trekker is a premium, multi-grade engine oil designed to surpass the demanding performance requirements of modern diesel engines of American, European and Japanese on and off-road vehicles, including engines with exhaust gas recirculation or EGR, It can also be used on turbocharged and supercharged diesel engines.
GRADE: SAE 15W-40 PROPERTIES
• Meets the demanding requirements of modern day, low emission diesel engines including engines with EGR
• Reduces soot related oil degradation
• Has high resistance to oil thickening and gum formation
• Has excellent piston and ring groove deposit control capabilities
• Allows for extended oil drain interval due to enhanced dispersancy
• Reduces oil consumption that leads to less top-ups
• Improves fuel economy on gasoline-powered vehicles
• Improves engine startability and idling characteristics
APPLICATION: Turbocharged or supercharged high performance diesel engines operating under both low speed-high load and high speed-high load condition
AVAILABLIE PACKAGES
• 200-liter drum
• 18-liter pail
• 6 x 4 liter in carton
• 24 x 1 liter in carton
TYPICAL CHARACTERISTICS
| Specific Gravity at 15.6 ºC | 0.8844 | |
| Flash Point, COC, ºC | 224 | |
| Color, ASTM | 2.5 | |
| Viscosity at 40 ºC, cSt | 106.4 | |
| Viscosity at 100 ºC, cSt | 14.68 | |
| Viscosity Index | 143 | |
| TBN, mg KOH/g | 10.8 | |
back to top
GEP
GEP is a general purpose, extreme pressure gear oil that provides dependable lubrication performance in passenger cars, trucks, buses, tractors and other vehicles.
GRADE: SAE 90 and 140
PROPERTIES
• Suitable for service top-up of limited slip-axles and for most gear drives
• Primary service station gear oil
APPLICATION: Manual transmissions, hypoid or spiral-bevel gears, worm gears, limited-slip differentials of highway vehicles and off-highway automotive equipment under sever, moderate or light condition
AVAILABLIE PACKAGES
• 200-liter drum
• 18-liter pail
• 6 x 1 liter in carton
• 24 x 1 liter in carton
TYPICAL CHARACTERISTICS
90 |
140 |
||
| Specific Gravity at 15.6 ºC | 0.9042 |
0.9165 |
|
| Flash Point, COC, ºC | 224 |
234 |
|
| Color, Visual | 8.0 |
>8.0 |
|
| Viscosity at 40 ºC, cSt | 208.2 |
511.9 |
|
| Viscosity at 100 ºC, cSt | 17.45 |
32.99 |
|
| Viscosity Index | 90 |
91 |
|
back to top
ATF PREMIUM
ATF PREMIUM is a multifunctional fluid for automatic and power-shift transmission. It is designed to meet the tropical country. Requirements of General Motors Dexron III, Ford Mercon, Allison C-4, and Caterpillar TO-2.
GRADE: SAE 20 PROPERTIES
• Provides quiet operation and smooth shifting
• Resistant to high temperature oxidation and fluid thickening
• Controlled frictional properties
• Outstanding anti-wear performance
• Protects against harmful attack by corrosive acid
• Provides protection against rusting and corrosion
• Compatibility with commonly used seal materials
• Outstanding hydraulic pump performance
APPLICATION: Automatic transmissions, power steering, hydraulic systems, torque converters in cars, trucks and heavy equipment
AVAILABLIE PACKAGES
• 200-liter drum
• 18-liter pail
• 24 x 1 liter in carton
TYPICAL CHARACTERISTICS
| Specific Gravity at 15.6 ºC | 0.8634 | |
| Flash Point, COC, ºC | 196 | |
| Color, ASTM | Red | |
| Viscosity at 40 ºC, cSt | 38.50 | |
| Viscosity at 100 ºC, cSt | 7.40 | |
| Viscosity Index | 161 | |
back to top
Fuels • Automotive Lubricants • Aftermarket Specialties • Greases • Industrial Lubricants • Marine Lubricants
COMPANY PROFILE PEOPLE PARTNERSHIP VISION/MISSION PRODUCTS & SERVICES CONTACT US